GIS Data Catalog
Water Quality Swale
Learn how to use GIS Open Data 🗺
Summary
Linear feature, vegetated, and designed to spread water out over a large surface area.
There are also different component types of swales as well.
Description
Component Types-Basic biofiltration swale: A long, gently sloped, vegetated ditch designed to filter pollutants from stormwater.
Grass is the most common vegetation, but wetland vegetation can be used if the soil is saturated.
-Wet biofiltration swale: A variation of the basic biofiltration swale used where the longitudinal slope is slight (1 to 2 percent or less), water tables are high, or continuous low base flow is likely to result in saturated soil conditions.
Under such conditions, healthy grass growth is not possible and wetland plants are used to provide the biofiltration mechanism.-Continuous inflow biofiltration swale: A biofiltration swale where water enters the swale continuously at numerous discrete inflows with no single inflow contributing more than about 10% of total swale flow.
Layer information
| Layer Name | sw_wq_swale_line |
| Subject Category | Utilities |
| Title | Water Quality Swale |
| Feature Count | 820 |
| Feature Type | Line |
| Next Update | Continually |
| Spatial reference | EPSG:2926 |
| Control ID | 2521 |
| Place Keywords | Pacific NW, King County, WA, Washington State |
| Theme Keywords | Utility, MS4, Stormwater, Drainage, Municipal Separate Stormwater Sewer System, NPDES Municipal Stormwater Permit, Utilitiescommunication |
| Supplemental Information | None |
Table Preview
Attribute information
|
OBJECTID
From ESRI |
Description
Internal feature number. DomainSequential unique whole numbers that are automatically generated. |
|
Shape
From ESRI |
Description
Feature geometry. DomainCoordinates defining the features. |
|
DBAssetID
From SOP Chapter 2: Database Design |
Description
DBAssetID is the unique identifier that is used to tie to Cityworks, MIS, or some other database. The DBAssetID is unique for each feature class and is generated by a script that runs nightly. Users should not modify the DBAssetID. DomainNot Found |
|
SwaleType
From SOP Chapter 2: Database Design |
Description
Within the Swale ComponentType, Swale Type designates the specific function and configuration of a swale. DomainBasic Biofiltration, Wet Biofiltration |
|
Intent
From SOP Chapter 2: Database Design |
Description
Intent tracks whether the infrastructure was designed primarily to convey stormwater or a natural water body. DomainNot Found |
|
SwaleDepth
From SOP Chapter 2: Database Design |
Description
The average estimated extent of a swale from top to bottom. DomainNot Found |
|
Width
From SOP Chapter 2: Database Design |
Description
The average estimated extent of a swale from side to side. DomainNot Found |
|
MeasSource
From SOP Chapter 2: Database Design |
Description
The source of the swale dimensions measurement. DomainNot Found |
|
EngineeredLength
From SOP Chapter 2: Database Design |
Description
EngineeredLength tracks the swale length per the design from engineered plans. Domain0.0 to 325.0 by |
|
Liner
From King County |
Description
Material type of low permeability liner or treatment liner that is located underneath the swale. DomainNot Found |
|
EngineeredWidth
From SOP Chapter 2: Database Design |
Description
EngineeredWidth tracks the swale width per the design from engineered plans. Use the bottom width (e.g. round to 2’ for the bottom width of 2.1’ below) DomainNot Found |
|
OwnerEntity
From SOP Chapter 2: Database Design |
Description
OwnerEntity tracks the owner of the particular feature. DomainAirport, FMD, Private, Roads, Unknown, WLRD |
|
Jurisdiction
From SOP Chapter 2: Database Design |
Description
Jurisdiction tracks the jurisdiction that governs the land that the asset resides in but does not determine owership. DomainKing County, Tukwila, Unknown |
|
KingCountyMS4
No Source Noted |
Description
Not Found DomainNot Found |
|
XYSource
From SOP Chapter 2: Database Design |
Description
XYSource tracks the method in which the geographic location of the asset was recorded. DomainCAD, Picked from aerial, Plans, Sketch, Unknown |
|
FieldVisitDate
From SOP Chapter 2: Database Design |
Description
FieldVisitDate tracks the date that staff last visited the feature in the field. DomainNot Found |
|
LastEditDate
From SOP Chapter 2: Database Design |
Description
LastEditDate tracks the date that staff last edited the feature. DomainNot Found |
|
DataStage
From King County |
Description
DataStage tracks the status of the data as it moves through the QAQC process. DomainAcquire - Asset still needs to be verfied Process - Asset has been verfied and needs to go through the QC process |
|
CurrentStatus
From King County |
Description
CurrentStatus tracks the status of the data as it moves through the lifecycle of an asset. DomainActive |
|
DataSource
From King County |
Description
DataSource tracks the group, program, or process that added the data. DomainNot Found |
|
FacilityID
From WLRD SWSS |
Description
FacilityID tracks the FacilityID number that the feature is a part of. DomainNot Found |
|
PlanLink
From WLRD SWSS |
Description
When digital plans are available, PlanLink provides a hyperlink to plan files. DomainNot Found |
|
GlobalID
From ESRI |
Description
GlobalID is a 36 character string that ArcGIS uses to uniquely identify features or table rows within a geodatabase and across geodatabases. DomainNot Found |
|
AssetID
From King County |
Description
An ObjectID is a unique, not null integer field used to uniquely identify rows in tables in a geodatabase. The values in this field are maintained by ArcGIS. The ObjectID is used by ArcGIS to do such things as scroll, display selection sets, and perform identify operations on features. DomainNot Found |
|
PAA
From SOP Chapter 2: Database Design |
Description
PAA tracks which Potential Annexation Area an asset intersects, if applicable. DomainNot Found |
|
Shape.STLength()
From ESRI |
Description
Shape is used by ArcGIS to store the geometry of a feature. DomainNot Found |
Contact information
| Maintained by | DNRP - Water and Land Resources |
| Primary |
Harkeerat Kang
Harkeerat.Kang@kingcounty.gov |
Terms of Use
| License | Terms of use and copyright |
Use this Data
|
Links
How to use in ArcGIS Pro |
|
| Sharing Status | Public |
Summary
Linear feature, vegetated, and designed to spread water out over a large surface area.
There are also different component types of swales as well.
Description
Component Types-Basic biofiltration swale: A long, gently sloped, vegetated ditch designed to filter pollutants from stormwater.
Grass is the most common vegetation, but wetland vegetation can be used if the soil is saturated.
-Wet biofiltration swale: A variation of the basic biofiltration swale used where the longitudinal slope is slight (1 to 2 percent or less), water tables are high, or continuous low base flow is likely to result in saturated soil conditions.
Under such conditions, healthy grass growth is not possible and wetland plants are used to provide the biofiltration mechanism.-Continuous inflow biofiltration swale: A biofiltration swale where water enters the swale continuously at numerous discrete inflows with no single inflow contributing more than about 10% of total swale flow.
Contact information
| Maintained by | DNRP - Water and Land Resources |
| Primary |
Harkeerat Kang
Harkeerat.Kang@kingcounty.gov |
Terms of use and copyright
| License | Terms of use and copyright |