King County GIS Center
King Street Center
201 S. Jackson St.
Suite 706
Seattle, WA 98104
giscenter@kingcounty.gov

+ 47.59909 N
- 122.33136 W

+ 47°  35' 56.72"
- 122° 19' 52.90"

 

Connect Undefined Type

Description | Contacts | Attribute Information | Constraints

Data layer thumbnail image

Description

Layer name: SW_CONN_UNDEFINEDTYPE
Subject category: utility
Title: Connect Undefined Type
Feature Count: 0
Feature Type: Point
Abstract: Undefined features are components that have not been created in the stormwater framework this could comprise of new stormwater designs or potentially archaic features that were not included in the development of the stormwater framework.
Purpose: Undefined type features are yet to be classified features within the stormwater framework.
Status: In work
Updated: As needed
Time period of content: (single date,as YYYYMMDD):: 20170328
Time period of content: (date range, as YYYYMMDD):: -
Spatial reference: WA State Plane North
FGDC Documentation: Classic or FAQ
Open Data Availability: Not Available
Place Keywords: Pacific NW, King County, WA, Washington state,
Theme Keywords: utility, MS4, stormwater, drainage, Municipal Separate Stormwater Sewer System, NPDES Municipal Stormwater permit, utilitiesCommunication,
Lineage: Not available

Contacts

Maintained by:
King County Stormwater Services Section
Primary: Jeanie Pride, GIS Specialist-Senior, 206-477-4803
(How to e-mail a County contact)
Secondary: KCGIS Center; giscenter@kingcounty.gov. This mailbox is monitored during business hours.

Attribute Information

ItemDescriptionDomain
_PipeCount_Pipe Count is the number of pipes, of any size, that connect to a Connect feature. Tanks that connect directly to the Connect structure are not included in the Pipe Count. However, pipes tying into the Connect structure and a tank should be included in the Pipe Count.
_Diameter_Diameter is the average interior diameter of the Connect structure, not the opening (cover frame or slab).
_WidthA_WidthA is the average inner width of the Connect structure, not the opening (cover frame or slab). Enter the smaller of the two widths in the WidthA column.
_WidthB_WidthB is the average inner width of the Connect structure, not the opening (cover frame or slab). Enter the larger of the two widths in the WidthB column.
_StructureShape_Structure Shape is the shape of the Connect feature.
_TotalDepth_Total depth is height from the bottom of the structure to the top at rim of the lid.
_SumpDepth_Sump depth is the height from the bottom of the structure to the bottom of the lowest pipe.
_MeasSource_MeasSource is the source of the Diameter, WidthA/WidthB, CoverSize, Depth and Sump Depth measurements.
Field measurement
_Material_Material tracks the primary material that the Connect feature is constructed of.
concrete
Metal
_CoverSize_CoverSize is the dimensions of the structures cover or lid. When entering cover sizes, enter the smaller dimension, separated by an “x,” and then enter the larger dimension. e.g. 24x30.
no cover
_CoverStyle_CoverStyle refers to the type of cover or lid.
Thru
_ControlStructure_ControlStructure records whether or not the feature functions as a flow control structure/flow restrictor.
No
Yes
_EmergencyOverflow_EmergencyOverflow tracks whether or not the structure itself functions as an emergency overflow.
No
Yes
_Intent_Intent tracks whether the infrastructure was designed primarily to convey stormwater or a natural water body.
Convey stormwater
_OwnerEntity_OwnerEntity tracks the owner of the particular feature.
Private
WLRD
_Jurisdiction_Jurisdiction tracks the jurisdiction that governs the land that the asset resides in.
King County
_Revisit_Revisit tracks various reasons that a staff may need to revisit an asset.
Confusing Feature
_XYSource_XYSource tracks the method in which the geographic location of the asset was recorded.
Picked from aerial
_Confidence_Confidence provides users unfamiliar with the various data sources an indication in the accuracy of the data. The values range from 1-4 and are described below 1 = Survey or high quality GPS (we have none of this currently) 2 = Mapped in the field, or office mapped and reviewed in field. 3 = Office mapped from plans- not yet reviewed in field. 4 = Antiquated, not field visited, office mapped from a sketch- not yet reviewed in field.
_ActiveDate_ActiveDate refers to the date when the asset is active in the ground.
_LoadedBy_LoadedBy tracks the staff member’s user name who added the feature to the database.
bfuller
_LoadDate_LoadDate tracks the date that the feature was added to the database. Complete this date only if you are adding a new point.
_FieldVisitedBy_FieldVisitedBy tracks the staff member’s user name that last visited the feature in the field.
bfuller
_FieldVisitDate_FieldVisiteDate tracks the date that staff last visited the feature in the field.
_LastEditBy_LastEditBy tracks the staff member’s user name that last edited the feature.
bfuller
hetrickn
_LastEditDate_LastEditDate tracks the date that staff last edited the feature.
_DateInstalled_DateInstalled tracks the date the feature was physically installed.
_DateRemoved_DateRemoved tracks the date the feature was physically removed.
_ForeignKey_ForeignKey is a value used to link to another database. The value you enter must match identically the value of the database that you intend on linking to.
d93031
_FKeySource_FKeySource is the source and name of the database that your foreign key is intended to link to.
_DataStage_DataStage tracks the status of the data as it moves through the QAQC process.
Process
_CurrentStatus_CurrentStatus tracks the status of the data as it moves through the lifecycle of an asset.
Active
_DataSource_DataSource tracks the group, program, or process that added the data.
SWSS Mapping
_QCFlag_QCFlag provides a space for QC scripts to write quality control issues for staff to potentially resolve.
_Notes_Notes provides extra space for staff to enter additional information not captured in other fields.
_GlobalID_GlobalID is a 36 character string that ArcGIS uses to uniquely identify features or table rows within a geodatabase and across geodatabases.
_PAA_PAA tracks which Potential Annexation Area an asset intersects, if applicable.


Constraints

Access: None

Use: King County data are made available with the understanding that they shall be used exclusively by the obtainer or his/her authorized agents. The information included has been compiled by King County staff from a variety of sources and is subject to change without notice. King County makes no representations or warranties, express or implied, as to accuracy, completeness, timeliness, or rights to the use of such information. This document is not intended for use as a survey product. King County shall not be liable for any general, special, indirect, incidental, or consequential damages including, but not limited to, lost revenues or lost profits resulting from the use or misuse of the information contained within this feature class. Digital products may not be reproduced or redistributed in any form or by any means without the express written authorization of King County.. Drainage patterns or features are commonly altered to accommodate changes in development, so the information contained herein may not reflect current conditions.