King County GIS Center
King Street Center
201 S. Jackson St.
Suite 706
Seattle, WA 98104
giscenter@kingcounty.gov

+ 47.59909 N
- 122.33136 W

+ 47°  35' 56.72"
- 122° 19' 52.90"

 

Control Other Point

Description | Contacts | Attribute Information | Constraints

Data layer thumbnail image

Description

Layer name: SW_CTRL_OTHER_POINT
Subject category: utility
Title: Control Other Point
Feature Count: 0
Feature Type: Point
Abstract: Component Types for Control Other (Point)-Dry Well: Gravel filled holes or structures used for temporary storage and infiltration of stormwater runoff.-Injection Well: A structure that is deeper than it is wide that is designed to infiltrate stormwater runoff.-Full Dispersion: Features a native vegetated flowpath segment of at least 100ft (25ft for sheet flow from a non-native pervious surface) along the flowpath that runoff would follow upon discharge. The flowpath segment must be either onsite or in an offsite tract or easement area reserved for dispersion and should be designated as a “native growth retention area” on the flow control BMP site plan attached to the required declaration of covenant and grant of easement. Full dispersion involves use of splash blocks, rock pads, gravel filled trenches or sheet flow.
Purpose: Stormwater management feature or best management practice (BMP) that provides Flow Control and/or Water Quality, but does not fit in one of the othe Control Components that is represented by point geometry.
Status: In work
Updated: Continually
Time period of content: (single date,as YYYYMMDD):: 20170328
Time period of content: (date range, as YYYYMMDD):: -
Spatial reference: WA State Plane North
FGDC Documentation: Classic or FAQ
Open Data Availability: Not Available
Place Keywords: Pacific NW, King County, WA, Washington state,
Theme Keywords: utility, MS4, stormwater, drainage, Municipal Separate Stormwater Sewer System, NPDES Municipal Stormwater permit,
Lineage: Not available

Contacts

Maintained by:
King County Water and Land Resources Division / Stormwater Services Section
Primary: Jeanie Pride, Engineer 1, (206) 477-4803
(How to e-mail a County contact)
Secondary: KCGIS Center; giscenter@kingcounty.gov. This mailbox is monitored during business hours.

Attribute Information

ItemDescriptionDomain
_DBAssetID_DBAssetID is the unique identifier that is used to tie to Cityworks, MIS, or some other database. The DBAssetID is unique for each feature class and is generated by a script that runs nightly. Users should not modify the DBAssetID.
_ComponentType_Within the Puget Sound Stormwater Infrastructure Framework, Component Type is the finest classification for a structure.
Dry Well
_DispersionDevice_Dispersion Device tracks the specific type of device that is used to disperse water.
_Present_Present tracks whether or not the Control feature is still there. Sometimes citizens will pave over them, or alter them in some way.
Present
Unknown
_FunctioningPerDesign_FunctioningPerDesign tracks whether or not the feature is functioning as it was designed.
Unknown
Yes
_AlteredFromDesign_AlteredFromDesign tracks whether or not the feature was altered from the original design.
No
Unknown
_SuspectedUIC_SuspectedUIC tracks whether or not the feature is a potential underground injection control.
No
Unknown
_OwnerEntity_OwnerEntity tracks the owner of the particular feature.
Roads
WLRD
_Jurisdiction_Jurisdiction tracks the jurisdiction that governs the land that the asset resides in.
King County
_InspectedBy_InspectedBy tracks the entity who inspects the asset.
_MaintainedBy_MaintainedBy tracks the entity responsible for maintenance of the asset.
_Revisit_Revisit tracks various reasons that a staff may need to revisit an asset.
_XYSource_XYSource tracks the method in which the geographic location of the asset was recorded.
GPS
Picked from aerial
_Confidence_Confidence provides users unfamiliar with the various data sources an indication in the accuracy of the data. The values range from 1-4 and are described below 1 = Survey or high quality GPS (we have none of this currently) 2 = Mapped in the field, or office mapped and reviewed in field. 3 = Office mapped from plans- not yet reviewed in field. 4 = Antiquated, not field visited, office mapped from a sketch- not yet reviewed in field.
3
_ActiveDate_ActiveDate refers to the date when the asset is active in the ground.
_LoadedBy_LoadedBy tracks the staff member’s user name who added the feature to the database.
jespin
_LoadDate_LoadDate tracks the date that the feature was added to the database. Complete this date only if you are adding a new point.
_FieldVisitedBy_FieldVisitedBy tracks the staff member’s user name that last visited the feature in the field.
jespin
_FieldVisitDate_FieldVisitDate tracks the date that staff last visited the feature in the field.
_LastEditBy_LastEditBy tracks the staff member’s user name that last edited the feature.
Automated
hetrickn
_LastEditDate_LastEditDate tracks the date that staff last edited the feature.
_DateInstalled_DateInstalled tracks the date the feature was physically installed.
_DateRemoved_DateRemoved tracks the date the feature was physically removed.
_ForeignKey_ForeignKey is a value used to link to another database. The value you enter must match identically the value of the database that you intend on linking to.
k90038
r64294
r91563
r91564
_FKeySource_FKeySource is the source and name of the database that your foreign key is intended to link to.
2D Ready
FMD_Project No
_DataStage_DataStage tracks the status of the data as it moves through the QAQC process.
Process
_CurrentStatus_CurrentStatus tracks the status of the data as it moves through the lifecycle of an asset.
Active
_DataSource_DataSource tracks the group, program, or process that added the data.
Roads NPDES Mapping
SWSS Mapping
_Notes_Notes provides extra space for staff to enter additional information not captured in other fields.
dry well
_MISComponentID_MISComponentID is used to track the Maintenance & Inspection System (MIS) ComponentID value for a feature.
_FacilityID_FacilityID tracks the FacilityID number that the feature is a part of.
_PlanLink_When digital plans are available, PlanLink provides a hyperlink to plan files.
_GlobalID_GlobalID is a 36 character string that ArcGIS uses to uniquely identify features or table rows within a geodatabase and across geodatabases.
_QCFlag_QCFlag provides a space for QC scripts to write quality control issues for staff to potentially.
_MinimumRequirement_MinimumRequirement tracks which Washington State Stormwater Manual “minimum requirement” the feature fulfills.
_AssetID_AssetID is the unique identifier that is used to tie to Cityworks, MIS, or some other database. The AssetID is unique for each feature class and is generated by a script that runs nightly. Users should not modify the AssetID.
_ConditionScore_
_ConditionDate_
_LegacyID_
_Location_
_POF_
_COF_
_BRE_
_BREDate_
_PAA_PAA tracks which Potential Annexation Area an asset intersects, if applicable.


Constraints

Access: None

Use: King County data are made available with the understanding that they shall be used exclusively by the obtainer or his/her authorized agents. The information included has been compiled by King County staff from a variety of sources and is subject to change without notice. King County makes no representations or warranties, express or implied, as to accuracy, completeness, timeliness, or rights to the use of such information. This document is not intended for use as a survey product. King County shall not be liable for any general, special, indirect, incidental, or consequential damages including, but not limited to, lost revenues or lost profits resulting from the use or misuse of the information contained within this feature class. Digital products may not be reproduced or redistributed in any form or by any means without the express written authorization of King County. Drainage patterns or features are commonly altered to accommodate changes in development, so the information contained herein may not reflect current conditions.